Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
LABORATORY MICROMOTOR
1.5 – REQUESTS FOR SERVICE AND SPARE PARTS
For all electrical maintenance requirements, contact CARLO DE GIORGI
di Baranzate di Bollate, Via Tonale, 1, Milan, Italy.
In the case of faults, notify CARLO DE GIORGI technical personnel of the
exact nature of the problem, specifying also the lot number shown on the
label affixed to the rear of the appliance.
2- TECHNICAL FEATURES
2.1 – TECHNICAL FEATURES AND PERFORMANCE
Performance: intermittent duty
Voltage
Frequency
Installed power
V
to motor
out
Max. tool speed
Delayed acting fuse
Mass
Transmitted vibration
(acceleration)
3 - INSTALLATION
3.1 - POSITIONING
The appliance is supplied assembled and ready for use after connecting
the control devices and the micromotor complete with handpiece to the
power supply. The package contains:
a) power supply unit, complete with mains cable;
b) micromotor complete with handpiece, equipped with 2.35 mm ∅ collet
(excluding Gold version);
c) footpedal (bench top versions only);
d) rubber mat;
e) user instructions.
The appliance can be moved by hand without requiring lifting devices.
Carlo de Giorgi
2900
V
230/120 230/120 230/120 230/120 230/120
Hz
50/60
W
70
V
59
rpm
25,000
A
1
kg
2.7
m/s²
< 2.5
Class II appliance
3000
4000
light
50/60
50/60
120
100
24
30
30,000
30,000
1.25
1.25
3.2
3.3
< 2.5
< 2.5
5000
Green
Star
50/60
50/60
300
90
40
30
30,000
30,000
2
1.25
4.3
3.3
< 2.5
< 2.5
GB - 5
Publicidad
Capítulos
Tabla de contenido
