Accessories; Reducer Bushes; Screwdriver For Collet Replacement; Mm ∅ Collet - Carlo De Giorgi 2900 Manual De Instrucciones

LABORATORY MICROMOTOR
ALL WORK ON THE APPLIANCE MUST BE PERFORMED WITH
THE POWER SUPPLY DISCONNECTED

8 - ACCESSORIES

8.1 – REDUCER BUSHES
The reducer bushes make it possible to use tools with different diameter
shanks.
To use the bushes follow the instructions in heading 5.2.1 regarding tool
insertion; in this case first insert the reducer bush and then insert the tool.
8.2 – SCREWDRIVER FOR COLLET REPLACEMENT
This tool is the same one that is required to adjust the collet if it fails to
open, as described in heading 6.2.1.
8.3 - 3 mm ∅ COLLET
8.4 – HANDPIECE SERVICING KIT
The kit consists in a set of wrenches covering all user service
interventions regarding the micromotor with handpiece.
8.5 – JEWELLERS HANDPIECE
Designed for use in jewellery workshops, this handpiece can be fitted
exclusively to the Green Star Gold model micromotor.
Carlo de Giorgi
WARNING!
Article Diameter (mm)
500/11
500/09
500/10
1
1.6
2.35
GB - 13