Open Push / Remove Nameplate - FRIEDLAND Libra+ D934S Instruccione Manuel

Open the bell push/converter
remove nameplate
Using a ball point pen press at point A shown
in fig 1. Remove the name plate. If desired,
you can prize apart the two halves of the
name plate and write on the card. Undo the
retaining screw B and remove the back of the
push.
A
Fig. 1
B
To fit the push/converter battery
Insert the CR2032 coin cell. Ensure the face
marked '+' is uppermost (Fig. 2).
Fig. 2
3