Publicidad
Idiomas disponibles
Idiomas disponibles
[] PC Settinqs
ThisfunctionletsyouadjustthePCscreen position, c lock andphaseduring
PCinput.
1
Press [SETUP] to display the main menu.
2
Use [Cursor •
/V]
to select"PC
SETTING",
then press [ENTER].
e.g.) PC mode
or
- TVSETUP -
CHANNELSETUP
V-CHIP SETUP
LANGUAGE
[ENGLISH]
CAPTION
[OFF]
RACK LIGHT
[BRIGHT]
COLOR TEMR
[NORMAL]
PC SETTING
CLOCK, PHASE
Use [Cursor •/V]
to select an item,
then use [Cursor </1_] to adjust the "CLOCK"setting
to stabilize the PC screen and the "Phase" setting to
improve the clarity of the PC screen.
Cursor
_1
Cursor
I_
CLOCK
to decrease
setting
value
to increase
setting
value
PHASE
Press [SETUP]
to exit.
3
Adjust the setting.
AUTO ADJUSTMENT
Use [Cursor
•IV]
to select "AUTO ADJUSTMENT",
then press [ENTER].
or
- PC SETTING-
_"AUTO ADJUSTMENT
HORIZONTALPosmoN
[ 15]
VERTICAL POSITION
[ -15]
CLOCK
[ -5]
PHASE
[
O]
Note:
• Adjust the "PHASE"setting after the "CLOCK"setting has
been properly adjusted.
• Youmay not obtain an appropriate screen with auto
adjustment for some signals. In this case, adjust the settings
manually,
• Thesetting range of the horizontal/vertical position is +30,
but the limit value differs depending on PCinput signaL
• The horizontal/vertical
position,
clock and phase of
the PC screen are automatically
adjusted
in a few
seconds.
HORIZONTAL
POSITION,
VERTICAL POSITION
Use [Cursor •IV]
to select an item,
then use [Cursor </1_] to adjust the PC screen position.
Cursor
_1
Cursor
I_
HORIZONTAL
POSITION
to move
PC screen left
to move PC screen right
VERTICAL
POSITION
to move
PC screen down
to move PC screen up
EN
Publicidad
