Audio Settings; Configuration - Tascam BD-MP4K Manual Del Usuario

Background opacity Solid/Translucent/Transparent
Window color Default/White/Black/Red/Green/Blue/Yellow/Magenta/Cyan
Window opacity Solid/Translucent/Transparent

Audio Settings

Audio Output
Function
S/PDIF
HDMI
FS Setting
Volume Control
Dolby DRC
DRC
* The downsampling frequency used during audio playback for signal processing inside the unit can be set. If an audio signal is played that
has a sampling frequency higher than the selected value, it will be converted to the set sampling frequency. PCM output signals from the
HDMI and DIGITAL OUT connectors will also be downsampled to the set value.
Speaker Settings
Function

Configuration

24
TASCAM BD-MP4K
Options
Bitstream/PCM/Off
Bitstream/PCM/Off
48 kHz/96 kHz/192 kHz
Enable/Disable
Off/On/Auto
Off/Mode 1/Mode 2
Options
2.x/3.x/4.x/5.x/6.x/7.x
The opacity of the background of subtitle fonts can
be changed.
p Solid
p Translucent
p Transparent
The color of the subtitle window can be changed.
The opacity of the subtitle window can be changed.
p Solid
p Translucent
p Transparent
Explanation
This selects the digital audio signal format.
This selects the HDMI output audio format.
This selects the sampling frequency.*
Volume up/down operations can be enabled or disabled.
Dolby dynamic range control can be set to Off, On or Auto.
Dynamic range control can be set to Off, Mode 1 or Mode 2.
Explanation
The channel configuration can be selected, and the speaker size,
trim and delay settings can be set for each channel. Press the ENTER
button to change the settings of that speaker and its paired speaker.
p Size: Speaker size setting
o Large/Small
p Trim: Trim adjustment
o This can be adjusted in a range from −10 dB to +10 dB in
0.5dB increments.
1
p Delay: Delay adjustment
o 0 cm – 1000 cm in 5cm intervals. (Delay time is 29μsec/cm.)
Channel configuration
2.x: Lt/Rt , Stereo
2
3.x: LCR
4.x: LRLsRs
5.x: -
6.x: -
7.x: C+LR+LsRs+LsrRsr
NOTE
For the subwoofer, only trim can be adjusted. The size cannot be
selected and the delay cannot be adjusted.
Subwoofer selection
None, Single