Jumping To A Specific Playback Time, Scene Or Track; Playing Files On Usb Flash Drives, Sd Cards, Data Discs And Network Drives - Tascam BD-MP4K Manual Del Usuario

Jumping to a specific playback time, scene
or track
(This also applies to "chapters" when using audio discs.)
During disc playback, press the SEARCH button to show an
information bar at the top of the monitor. A cursor will appear in
the time display area.
At this time, press a l / ; cursor button to move the selection
between the time and chapter display areas.
NOTE
Only playback times and chapter numbers that exist on
the playing disc can be specified. Values that exceed these
ranges cannot be specified.
Jumping to a specific playback time
1. In this state, press the ENTER button to select the time
display area, enabling the value to be changed.
2. Use the number buttons to input values.
Use the l and ; cursor buttons to move between the
hours, minutes and seconds.
(In the illustration below, values have been entered for
minutes and seconds.)
3. After inputting values, press the ENTER button to start
playback from the specified time.
(The chapter display will also change to the chapter at the
specified time.)
Chapter display
Press the ON SCREEN button to close the information bar.
Jumping to a specific chapter or track
1.
Use a l or ; cursor button in the time display area to move
the cursor to the chapter display area.
In this state, press the ENTER button to select the chapter
display area, enabling the value to be changed.
2.
Use the number buttons to input values.
3. After inputting values, press the ENTER button to start
playback from the specified chapter.
34
TASCAM BD-MP4K
Time display
Hours: minutes: seconds
(The time display will also change to the time at the
specified chapter.)
Press the ON SCREEN button to close the information bar.
Playing files on USB flash drives, SD
cards, data discs and network drives
1. Select Media on the Home Screen and press the ENTER
button.
2. Media icons will appear. Use the j and k cursor buttons
to select the icon with the file you want to play, and press
the ENTER button.
will appear on the display while the medium is
LOAD
being loaded. The following will be shown when loading
completes.
i USB flash drive:
i SD card:
i Network media:
Opening the selected icon will show the following folders.
... : Top folder
Photo: Photo folder
Music: Music folder
Video: Video folder
AVCHD: High-quality video folder
3. Select the target folder, and press the ENTER button.
Files inside the folder will be shown.
(Example: Music folder open)
4.
Use the j and k cursor buttons to select a file and press
the 7 button to start playback.
When a file is selected, the following information
appears on the right side of the monitor.
i Thumbnails of image files
i Various information for audio and video files
USB
SD
Network name