Troubleshootingfor Anynett - Samsung 5 Serie Manual Del Usuario

Troubleshooting for Anynet +
Problem Possible Solution
Anynet + does not work. • Check if the device is an Anynet+ device. The Anynet + system supports Anynet+
devices only.
• Connect only one receiver (home theater).
• Check if the Anynet+ device power cord is properly connected.
• Check the Anynet + device's Video/Audio/HDMI 1.3 cable connections.
• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
• Check whether the TV remote control is in TV mode.
• Check whether it is Anynet + exclusive remote control.
• Anynet + doesn't work in certain situations. (Searching channels, Operating, Plug & Play,
etc.)
• When connecting or removing the HDMI 1.3 cable, please make sure to search devices
again or turn your TV off and on again.
• Check if the Anynet+ Function ofAnynet + device is set on.
I want to start Anynet +, • Check if the Anynet+ device is properly connected to the TV and check if the Anynet+
(HDMI-CEC) is set to On in the Anynet + Setup menu.
• Press the TV button on the TV remote control to switch to TV. Then press the TOOLS
button to show the Anynet + menu and select a menu you want.
I want to exit Anynet +. • Select View TV in the Anynet + menu.
• Press the SOURCE button on the TV remote control and select a device other than
Anynet + devices.
• Press V CH A, CH LIST, PRE-CH, and FAV.CH to change the TV mode. (Note
that the channel button operates only when a tuner-embedded Anynet + device is not
connected.)
The message Connecting to • You cannot use the remote control when you are configuring Anynet + or switching to a
Anynet + device.,, appears on the view mode.
screen. = Use the remote control when the Anynet+ setting or switching to view mode is complete.
The Anynet+ device does not • You cannot use the play function when Plug & Play is in progress.
play.
The connected device is not = Check whether or not the device supports Anynet+ functions.
displayed, • Check whether or not the HDMI 1.3 cable is properly connected.
• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
• SearchAnynet + devices again.
• You can connect anAnynet + device using the HDMI 1.3 cable only. Some Some HDMI
cables may not support Anynet+ functions.
• If it is terminated by an abnormal situation such as disconnecting the HDMI cable or
power cord or a power failure, please repeat the device scan.
The TV program cannot be • Check whether the antenna jack on the recording device is properly connected.
recorded,
• Connect the optical cable between TV and the receiver. The TV sound is not output
through the receiver,