Causes And Rectification Of Faults - Caso Master P1 Manual De Instrucciones

17.2 Causes and rectification of faults

caso Master P1
In the event of a fault, an error code will appear in the display; it
describes the cause of the fault.
The following table assists in localizing and rectifying minor
faults.
Fault Possible Cause
Waiting status
--- ----
Abnormal supply
voltage.
E1/E2
Abnormal
E3/E4
temperature
Overheating
protection / Bad
E5/E6
hotplate heat
radiation
Overheating
protection /
E7/E8
Temperature sensor
failure
If error messages continue to be displayed after an extended
waiting period or after restarting the appliance, then it must be
sent to Customer Service to be examined.
If you are unable to solve the problem with the steps shown
above, please contact Customer Service.
Place a suitable pot/pan
onto the induction
cooking field. The plate
will work as usual
Make sure the appliance
is connected to the
voltage indicated
Please inspect the pot
Please restart after
hotplate has cooled down
Please restart after
hotplate has cooled
down
Please note
To Rectify
58