Menu Options: For Instant Dvd + Dv Only; Menu Options: Contol; Menu Options: Applications - ADS Instant DVD 2.0 Manual De Instrucciones

For Instant DVD + DV Only:
1.) Connect your Digital Camcorder with the provided 4 pin to 4 pin DV cable from your camcorder to the 4 pin
DV port on the front of the Instant DVD + DV device.
2.) Turn your camcorder on and to the VCR/VTR mode. Note: we recommend using the external power supply
for your camcorder for best results rather than running on battery power.
3.) Click "PLAY" on the DV Camcorder control panel to start the camcorder tape.
4.) Click "Preview" on the CapWiz interface and you will see video from your digital camcorder.
5.) Click "Stop" on the CapWiz interface to stop previewing video before you click "Stop" on the DV camcorder
control panel.
*If you wish to upgrade your Instant DVD 2.0 unit to an Instant DVD + DV unit, contact the ADS Tech customer
service department to see if there are any current upgrade offers.
• Control
The Control menu gives you another way to control video recording and playback:
The selections are: Preview, Record, Stop, Pause and Play
• Applications
The Applications menu gives you another way to jump to bundled applications and you can also change the path
of these applications if you happened to install them on a different drive.
1. Click the Applications menu button
2. Click on DVD Movie Factory or Video Studio to Jump to the selected application. Capture Wizard will
automatically close when you do this.
3. Click the Edit button. This will show the default or standard directory path the applications are normally installed.
4. To change the directory path click the box with the "..." and you can browse to the directory path you installed
the application.
INSTANT DVD 2.0 Page 23