Basic Safety Precautions - Hilti RT 6-A22 Manual De Instrucciones

Battery tool use and care
▶ Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with another battery pack.
▶ Use power tools only with specifically designated battery packs. Use of any other battery packs may
create a risk of injury and fire.
▶ When battery pack is not in use, keep it away from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects, that can make a connection from one terminal to
another. Shorting the battery terminals together may cause burns or a fire.
▶ Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
▶ Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may
exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
▶ Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature
above 130° C (265 °F) may cause explosion.
▶ Follow all charging instructions and do not charge the battery pack or tool outside the temperature
range specified in the instructions. Charging improperly or at temperatures outside the specified range
may damage the battery and increase the risk of fire.
Service
▶ Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
▶ Never service damaged battery packs. Service of battery packs should only be performed by the
manufacturer or authorized service providers.
2.1.2

Basic safety precautions

In addition to the safety instructions given in the various sections of these operating instructions, the following
points must be strictly observed at all times.
Personal safety
▶ Never tamper with or modify the power tool in any way.
▶ Use the right tool for the job. Do not use the tool for purposes for which it was not intended. Use it only
as directed and when in technically faultless condition.
▶ The tool is designed exclusively for setting blind rivets.
▶ Stay alert, watch what you are doing and use common sense when operating the tool. Do not use the
tool if your full attention is not on the job.
▶ To reduce the risk of injury use only genuine Hilti accessories and spare parts or those of equivalent
quality.
▶ Use only fasteners of a type approved for use with the tool.
▶ Observe the information printed in the operating instructions concerning operation, care and maintenance.
▶ Never point the tool toward yourself or other persons.
▶ Never press the nosepiece of the tool against your hand or against any other part of your body (or other
person's hand or part of their body).
▶ Drive the fasteners into metal only. Do not attempt to drive fasteners into other materials.
▶ Pull the trigger only when the nosepiece of the tool is in contact with the working surface and the tool is
fully compressed.
▶ When driving fasteners, always hold the fastening tool at right angles to the working surface in order to
prevent the fastener being deflected by the surface.
▶ Never re-attempt to drive a fastener, because this can cause breakage.
▶ Keep the grips dry, clean and free from oil and grease.
▶ Never leave a loaded tool unattended.
▶ Always remove the rivet before cleaning, servicing or carrying out maintenance work on the tool.
▶ Never leave the tool unattended.
▶ Unload (remove blind rivet) the tool when it is not being used and store it in a locked, dry place where it
is inaccessible to children.
▶ Do not disassemble the tool while it is hot. If this is unavoidable, wear protective gloves.
▶ Do not operate the tool when parts are damaged or when the controls do not function correctly. Have
the tool repaired by Hilti Service.
▶ Do not press the switch when there is a blind rivet in the tool.
*2225140*
Printed: 30.07.2019 | Doc-Nr: PUB / 5466619 / 000 / 02
2225140 English 15