Troubleshooting - Oregon EG600 Manual De Instrucciones

Troubleshooting

Use this table to see possible solutions for problems with the edger If these suggestions do not solve
the problem, see "Warranty and Service"
SYMPTOM
Edger vibrates
excessively during
use
The edger does not
cut properly
EG600 Multi-attachment
Troubleshooting
POSSIBLE CAUSE
Blade is damaged
Blade is not attached
properly
The blade is dull
RECOMMENDED ACTIONS
Replace with a new Oregon blade
Remove the blade and reinstall, making sure the nut
is securely tighten See "Replacing the Cutting Blade"
Sharpen the blade or contact your local Oregon
representative
17