Motostar S500R Manual De Instrucciones página 24

Adjusting the waiting time before automatic the closing
By default, this function is deactivated. To activate it:
Press P for about five seconds, 1
1
appears.
”
Press P, 0 appears
3
To change the duration of the waiting time before the automatic closing, either press + or -.
60 seconds
5
180 seconds
6 Press P to save the procedure
Memorizing (function 5) must always be the last phase of programming, otherwise the settings will not be saved.

The operator emits a sound signal for 20 seconds before the door starts to automatically close. Simultaneously, the courtesy light flashes. When
the door starts closing, the operator emits a sound signal and the courtesy light is on. When the door is closed, the operator does not emit any sound
signal and the courtesy light stays on for three minutes.
2
4
90 seconds
210 seconds
Press + and select 7.
Press + and select 1. The automatic
closing is active and the waiting time is 30
seconds.
120 seconds
240 seconds
150 seconds