Stirrer Description; Installation - Caframo BDC250 Manual De Intrucciones

Stirrer Description

1
5
1 Four-digit LED display
2
Button - power on/off
Button - increase rpm
3
4 Button - decrease rpm

Installation

Stand Assembly
Remove lock nut. Insert the threaded end of the stand rod into the stand base.
Turn rod clockwise to tighten. Secure with lock nut.
Stirrer Installation
Slide the clamp opening over the top of the stand rod. Lower to desired height.
Turn clamp knob to securely tighten the stirrer onto the stand rod. Connect
supplied power cord to stirrer. Connect power cord to a grounded electrical outlet.
Impeller Assembly
Add impeller blade(s) to impeller shaft. Tighten screw to secure.
Impeller Installation
Insert impeller shaft into collet opening until it stops. Tighten set screw.
2
3
4
6
5
Collet
6
Housing
7
Clamp opening
8 Clamp knob
8
7
8