Transportation And Storage; Cleaning And Care - Scott PISTON Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 20
The strap guide should be positioned so that it fits just under your earlobes (Illustra-
tion 2). To do this, push the strap guide up or down until you find the proper position. If
you are satisfied with these adjustments, put the helmet on and try to pull the helmet
off your head from the back and the front. A helmet that fits properly should be com-
fortable without sliding forwards or backwards.
If you are not able to adjust your chosen helmet accordingly, THEN DO NOT USE THE
HELMET - replace it with a different size helmet or a different model.
Note  : Please always remember to make sure your helmet (or your child's helmet) is
properly adjusted each time before you ski or snowboard. If you have any questions,
please contact your SCOTT dealer. SCOTT SPORTS shall not accept any complaints
arising from the use of an incorrect fitted helmet.
VENTILATION
The SCOTT CAMBLE and SCOTT PICTON helmets have 9 passive ven-
tilation openings, which ensure optimal, climate controlled conditions.
IV. TRANSPORTATION AND STORAGE
When transporting or storing keep your helmet in the soft bag supplied in the retail
box. Let your helmet air dry after each use and then store it in a cool dry place.
Plastic shells can melt at high temperatures (above 40 °C). For this reason, do not
leave your helmet in the car or near direct or indirect sources of heat or warmth. Dam-
age due to improper storage is not covered by any warranty.
V. CLEANING AND CARE
How to keep your helmet like new? We recommend you clean your helmet with a
mild detergent and water only. Do not apply hydrocarbons, cleaning liquids, solvents,
paints, adhesives, self-adhesive labels or other external influences which may damage
your helmet and possibly rob it of its protective properties – even if you cannot directly
see the damage externally. Any subsequent paint applied to the helmet automatically
voids any warranty claim.
LINING
You can easily remove the inner lining by hand and wash it by hand using a mild soap.
Never machine-wash the lining pieces at high temperatures.
For cleaning, maintenance or disinfection, use only substances that have no adverse
effect on the helmet and are not known to be likely to have any adverse effect upon
the wearer. If you do not respect those indications your helmet will lose its technical
effectiveness and this will automatically void any warranty claim.
All helmets are subject to a limited service life and should be replaced if they show
obvious signs of wear or after serious falls. Replace your helmet with a new one at
least every three (3) years.
VI. WARRANTY
SCOTT SPORTS SA guarantees the original purchaser of this product that the product
is free from material and processing defects for a period of two years from the date
of purchase. This warranty does not cover defects or material damage due to abuse,
neglect, improper repair, unsatisfactory fit, cleaning, disinfection and/or maintenance,
alterations or use for purposes other than those intended by the manufacturer. This
warranty supersedes all other agreements and warranties, and neither representatives
nor any other parties are authorized to assume liability on behalf of SCOTT SPORTS
SA in conjunction with the sale or use of this product.
ENGLISH -6

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Camble

Tabla de contenido