Welcome To The Outback Power Systems Gtfx And Gvfx La Series Inverter/Charger System; Gtfx And Gvfx La Series Inverter/Charger Models; Parts Included - OutBack Power GTFX Serie Manual De Instalación

Welcome to the OutBack Power GTFX and GVFX LA Series Grid-Interactive
Inverter/Charger System
The GTFX and GVFX series Inverter/Chargers (also referred to as the FX series) offer a complete power conversion
system—DC to AC, battery charging, and an AC transfer switch—which provide complete grid-interactive service.
They can also be used in a stand-alone or back-up application. These systems are designed for indoor or enclosed
locations.
OutBack Power Systems does everything possible to assure the components you purchase will function properly
and safely when installed as instructed according to local and national electrical codes. Please read all of the
following instructions and the instructions that come with any other OutBack components that make up your
power system. Further instructions on individual FX set-ups as well as systems assemblies are included with the
FLEXware manuals.
The GTFX and GVFX LA series produces an output voltage of 127 VAC per inverter. These inverters have been
programmed to accept this voltage as the optimal amount from an AC source. This manual often refers to the
voltage as "120 VAC". However, this is a nominal reference to the true level of 127 VAC.
NOTE: This product does not carry a UL1741 or ETL listing. It is not to be used in the United States,
Canada or Puerto Rico.
The GVFX and GTFX LA Series Inverter/Charger Installation Manual covers the following information:
Grid-Interactive FX Series Inverter/Charger Models
Sealed Units (designed for harsher environments, but still require enclosed protection)
Vented Units (designed for protected environments)
Each model FX has a single phase output marked with this symbol:
Each inverter puts out a sine wave waveform marked with this symbol:

Parts Included

46