Rts, Mate/Hub Wiring - OutBack Power GTFX Serie Manual De Instalación

RTS, MATE/HUB WIRING

Status Lights
Battery Lights
LED Color
GREEN
YELLOW
RED
WARN(ING) Screens
RJ-11 modular jack connects the RTS, the
external battery temperature sensor.
RJ-45 jack is used for external communications.
FX, which should be plugged into HUB's Port 01.
The RTS cable is folded and routed under the AC
Wiring Compartment's Lexan cover, fitting into a
small indentation in the aluminum casting between
the battery terminals. ONLY USE THE OUTBACK RTS;
OTHER BRANDS YIELD INCORRECT READINGS.
Charge Controllers, a HUB is required.
LED Color
GREEN
YELLOW
RED
12 VDC
(FULL) 12.5 or higher
(OK) 11.5 to 12.5
(LOW) 11.5 or lower
LED Action LED indicates
GREEN Inverter ON
Flashing GREEN Search mode or
Slave power
Off Inverter OFF
Solid YELLOW AC source is
connected
Flashing AC input live,
waiting to con-
YELLOW
nect to OBX-IC
Off No AC input
present
Solid RED Critical error,
contact OutBack
Power Systems
Flashing RED Warning, a non-
critical error has
occurred
24 VDC 48 VDC
25.0 or higher 50.0 or higher
23.0 to 25.0 46.0-49.6
23.0 or lower 46.0 or lower
65