Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
FRONT PANEL
[POWER SWITCH
1.
Turn on/off the power.
Caution
·To ensure that high-volume noise is not output from the speakers, power on the connected device
first and then turn on this device. When turning the system off, turn off this device, and then the
connected devices.
·After turning the power switch off, wait for about five seconds before turning it on again. Rapidly
turning the power switch on and off in succession can cause the unit to malfunction.
·Even when the switch is in the off position, a small amount of electricity is still flowing to the unit.
If it will not be used for an extended period of time, therefore, be sure to unplug the power cord
from the wall AC outlet.
[POWER
]
2.
Turns on when the power is on.
3.
[VOLUME
Lits when input signal exceeds a
certain level.
[VOLUME LIMIT] indicator
4.
Lits if signal output to the speakers
exceeds the limit value, causing the
limiter to activate, or if the internal
temperature of the device increases
abnormally. If the limiter activates,
turn the [VOLUME] knob to the left so the indicator light goes out.
[VOLUME] knob
5.
Adjusts the volume output to the speakers. Turning to the right increases the volume. Turning all the
way to the left mutes the sound.
]
indicator
SIGNAL]
indicator
[8Ω]
Low-impedance
connections
[16Ω]
[70V]
High-impedance
connections
[100V]
PAGE 3
User Manual
/ Manual de uso
3
2
5
1
4
[VOLUME SIGNAL]
-17.0dBu or more
-17.0dBu or more
-0.8dBu or more
2.3dBu or more
PA 100
Publicidad
Tabla de contenido
