Customer Service - Klein Tools IR10 Manual De Instrucciones

BATTERY REPLACEMENT
When the battery indicator
be replaced.
1. Open the battery compartment
door locking screw.
2. Remove exhausted 9V battery and dispose of appropriately.
3. Replace 9V battery, reinstall the battery door, and refasten the
door locking screw .
Be sure meter is turned off and wipe with a clean, dry lint-free
cloth. Do not use abrasive cleaners or solvents. Take care to keep
the sensor lens clean at all times. If required, loose debris may be
removed from lens using clean compressed air. Lens may also be
cleaned using a soft cloth or cotton swab with water or rubbing
alcohol only . Lens must be allowed to completely dry prior to use.
Remove the battery when meter will not be used for a prolonged
period of time. Do not expose to high temperatures or humidity.
After a period of storage in extreme conditions exceeding the limits
mentioned in the General Specifications section, allow the meter to
return to normal operating conditions before using.
Do not place equipment and its accessories in the trash.
Items must be properly disposed of in accordance with local
regulations. Please see www.epa.gov or www.erecycle.org
for additional information.
MAINTENANCE
, shows only one bar, the battery must
D
CLEANING
STORAGE
WARRANTY
www.kleintools.com/warranty
DISPOSAL / RECYCLE

CUSTOMER SERVICE

KLEIN TOOLS, INC.
450 Bond Street
Lincolnshire, IL 60069
1-877-775-5346
customerservice@kleintools.com
www.kleintools.com
by unscrewing the battery
6
9