Installation Of The Scanner; Activating Additional Modules - IDC S1 Modo De Empleo

I N S T A L L A T I O N
▷ Connect the white DVI cable (digital) to the
monitor as well as to the digital connection of
E N
the PC.
▷ Connect the mouse and the keyboard to the PC.
5.4

Installation of the Scanner

As each scanner is individually factory-cal-
ibrated, the data on the installation CD are
only valid for the respective scanner.
Prior to installation:
▷ Check if the serial number of the scan-
ner on the type plate is identical with the
serial number stated on the CD!
Prior to installation:
▷ Make sure that the main switch of the scanner is
positioned on 0.
▷ Connect the two enclosed USB cables to the
scanner and the PC.
▷ Insert the CAD Dongle in a free USB port on the
rear side of the PC.
▷ Connect the mains cable to the power supply
connection of the scanner as well as to a mains
socket outlet.
32
5.5

Activating Additional Modules

Additional modules must be activated in the scan-
ner software before they can be used.
▷ Click on
Options > Access > Add Activation
Code...
to enter the received scanner-specific
activation code.
▷ Restart the software to activate the module.