IEI
2. UNIMAX 1010 / PROMAX 1020 (with digital timer and digital speed display)
The control panel features the following controls:
A 2-pole master switch (toggle-type, lighted green on the left side of the unit)
B setting knob, shaking frequency
C Set Time key
D Set Time key
E Select key: display selector: shaking frequency (Act Speed) / time (Act Time)
F LED Time: time appears in display
G LED Speed: rotational speed (shaking frequency) appears in display
H Start / Stop key: to START / STOP shaking action
I
LED Start /Stop: lighting, while item is running
J
4-digit display
J
I
I
H
G
A.
Continuous shaking
•
Turn item ON with master switch (A)
•
Set time with
•
Start continuous operation by hitting the Start / Stop key. Start and Speed LEDs turn on,
shaking frequency is displayed (4-digit display).
•
Set shaking frequency with knob (B)
•
Hitting Start / Stop key will stop shaking.
B.
Timer controlled shaking
•
Set time between 0 and 999 minutes with Set Time
Short hits on the keys change time setting slowly, whereas depressing keys is going to
change time rapidly. Depressing the Set Time
000.
•
Depressing the Start / Stop key (H) starts shaking at the frequency selected with knob (B)
and for the time interval set before. Start LED turns ON.
•
Time lapse appears in a 3-digit display. Time LED turns ON.
•
Current shaking action may be discontinued with the Start / Stop key (H). Actual time
won't change. Hitting this Start / Stop key continues shaking at the moment it had been
discontinued.
•
In case of a power supply failure or interruption (item turned OFF), this feature is lost.
•
Hitting the Select key during timer-controlled operation, you may change display from
time to shaking frequency and vice versa.
Speed LED turns ON. Timer LED flashes to indicate timer operation mode.
•
Timer LED also flashes, when timer-controlled operation was discontinued with the Start /
Stop key.
: time up
: time down
F
D
C
B
E
and
keys to 000 (depress
A
and
together).
or Set Time
and Set Time
22
keys.
keys resets the timer to