KTIR-1050
Non-Contact Infrared Thermometers
suitable for obtaining a higher accuracy emissivity.
After obtaining the emissivity, if the difference
between IR value (in the middle of LCD) and TK
value (at the lower side of LCD) is too big, the
obtained emissivity will be incorrect. It's necessary
to obtain a new emissivity.Wireless Transmit
Function
1. In the MAX
button to stir up the Wireless Transmit function,
"USB" will be displayed on the upper right corner of
the LCD. Press the USB button again; this function
will be turned off.
2. After the Wireless Transmit function is turned on,
firstly connect the USB interface (RF 433MHz) to
the computer and wireless transmitter
to the Thermometer, then press the
"ON" button on the transmitter and
open the 8855 software on the
computer, thence, the IR temperature
readings on the Thermometer will be
transmitted to the computer.
14
, MIN, DIF, AVG
mode, press the USB
www.grupotemper.com