TROUBLESHOOTING
SETUP AND CONFIGURATION PROBLEMS
1. HOW DO I RESET MY DAP-1320 WIRELESS RANGE EXTENDER N300 TO FACTORY
DEFAULT SETTINGS?
- ensure the product is powered on.
- using a paperclip, press and hold the reset button on the bottom of the device for 5
seconds.
Note: Resetting the product to the factory default will erase the current configuration
settings. the default Wi-Fi network name (ssId) and password are printed on
the dap-1320's Wi-Fi configuration card.
2. HOW DO I CONNECT A PC OR OTHER DEvICE TO THE DAP-1320 IF I HAvE FORGOTTEN
MY WI-FI NETWORK NAME (SSID) OR WI-FI PASSWORD?
- If you haven't changed the extended Wi-Fi network's settings, you can use the
network name (ssId) and Wi-Fi password on the Wi-Fi configuration card.
- If you did change the network name (ssId) or Wi-Fi password and you did not record
this information on the Wi-Fi configuration card or somewhere else, you must reset
the device as described in Question 1 above.
- It is recomended that you make a record of this information so that you can easily
connect additional wireless devices in the future. You can use the included Wi-Fi
configuration card to record this important information for future use.
6
DAP-1320