Scope of delivery
Radio-controlled alarm clock
Battery type LR03 (AAA), 1.5 V
Operating Manual
Start-up
To use the device, you will need a LR03 (AAA),
1.5 V battery.
1. Slide the battery compartment cover
downwards.
2. Insert the batteries as shown on the bottom
of the battery compartment. Pay attention
to the correct polarity (+/-).
3. Replace the battery compartment cover and
slide it upwards. Battery compartment lid
must engage audibly.
Once the battery has been inserted, the alarm
clock switches to receiving mode; see next chapter.
38
(1x)