Controls; Filters - GE JV247 Manual De Instrucciones

Controls

Throughout this manual, features and appearance may vary from your model.
Control Knobs (on some models)
OFF
LO HI
MED
1
OFF
HI
MED
LO
1
1. FAN Control:
Continuous use of the fan system while cooking
helps keep the kitchen comfortable and less humid.
It also reduces cooking odors and soiling moisture
that create a frequent need for cleaning.
2. LIGHT Control:
NITE for use as a night light.

Filters

Be sure electrical power is off and all surfaces are cool before cleaning or servicing any part of the vent hood.
The efficiency of your hood depends on a clean filter.
Frequency of cleaning depends on hood use and the
type of cooking you do. However, the grease filter should
be cleaned at least once a month.
To remove:
Pull down on the center of the front edge of the filter. The
filter will then slip out of the retaining tabs on the back.
To replace:
Slip the back edge of the filter into the retaining tabs and
push the front edge up until it snaps into place.
To clean:
Soak and then agitate it in a hot water and detergent
solution. Light brushing can be used to remove embedded
dirt. Rinse, shake and let it dry before replacing.
6
OFF
ON
NITE
2
OFF
ON
NITE
(AV447 models only)
2
Turn to HI, MED or LO as needed.
Turn to ON while cooking or to
Switch Pad Controls (on some models)
ON
OFF
1
1. LIGHT Control:
the light ON.
2. Fan Settings Buttons:
top to turn the fan on HI and at the bottom to turn it
on LO. The center position is OFF.
Continuous use of the fan system while cooking
helps keep the kitchen comfortable and less humid.
It also reduces cooking odors and soiling moisture
that create a frequent need for cleaning.
NEVER OPERATE THE HOOD WITHOUT THE FILTER
IN PLACE.
With careful handling, the metal filter will last for years. If
a new replacement filter becomes necessary, order the
part from your dealer. Order genuine GE Appliances part
number WB02X8391.
Grease filter
HI
OFF
LO
2
Press the pad at the top to turn
Press the pad at the
49-80589-7