Unique Features - Ampro TechShow ION 230B Manual De Usuario

Channel
St Ex Ba1 Ba2
16 19 12 14

6. Unique Features

6.1 RDM, stand for "Remote Device Management", with this
function, users can realize remote control of the device, such
as remotely changing DMX address, reverse pan/tilt setting,
check a lot of useful information such as temperature, pow-
er consumption, fan speed. Etc. Every single device has a
unique RDM code before left factory to distinguish from each
other, usually not suggest users change this code freely.
6.2 Software upgrade function via DMX cable, if there is any
new firmware for this device come out, it can be upgraded
simply via a software upgrade box, no need to change any
mechanical parts. The upgrade box is not included in the
package, if need any further assistance pls just contact au-
thorized dealers.
6.3 Hibernation, the device will enter sleeping mode if acti-
vated after a period of disconnecting DMX signal to save the
power consumption, and will return immediately as soon as
the DMX signal is sent again.
6.4 Display battery, this function is prepaid in the display
PCB, users just need to install a normal 10440 600mAh 3.7V
rechargeable lithium battery, then users could power on the
display and do setting without connect to main power.
6.5 Display back-up communication IC, there is a back-up
communication IC installed in the display PCB, so users could
replace at once if the working one is broken, no need to wait
long time from service.
ION 230B
ENGLISH VERSION
name
Control
function
Normal
Reset All
Pan&Tilt Reset
Color Reset
Gobo Reset
Shutter Reset
Other Reset
Display Off
Display On
Lamp Off
Lamp On
Hibernation
TBD
6.6 Display flip, by press up and down button for more than
3 seconds, the display will flip automatically, this function is
useful to read menu conveniently when device is hanged.
Min DMX Max DMX
0 7
8 15
16 23
24 31
32 39
40 47
48 55
56 63
64 71
72 79
80 87
88 95
96 255
p. 17