hager WDI07 Serie Manual De Instrucciones página 13

Assigning an application to a control panel
z "Wipe" over the user interface with your finger until the required page is
displayed.
z Empty control panel > Touch for 2 seconds.
A dialogue window opens for logging in.
Before the App selection can start, the user must log in (Figure 6).
z Select Password row.
A dialogue window with a numerical keyboard opens.
z Input 4-character password using the keyboard and terminate with Done.
z In the dialog window, confirm the displayed password with OK.
The dialog window for the App selection opens (Figure 7).
The password 8273 for the Administrator and 0000 for the user is set at
P
the factory for the initial login.
If the wrong password is entered, the Launcher will change automatically
P
to the home page.
z Select the required App
The dialog window for configuration of the App display opens.
z Define the display of the App on the Launcher page. To do this, activate
Select Icon from Library and select icon from the bottom row (Figure 8).
The selected icon is applied and displayed at the top of the page.
The row with the icons can be moved by wiping sideways in order to select
P
other icons.
z Give the App a name. To do this, press the input field with the flashing
cursor.
A window with a keyboard opens (Figure 8).
z Enter the name for the App and finish the input with Done.
z With Add finish the display configuration for the App or terminate the as-
signment without saving with Cancel.
If the App is not configured or the configuration is aborted, icons and
P
names of the App are applied and displayed on the Launcher by the re-
spective manufacturer.
z
13