Installing The Dome Cover; Focusing The Dome Camera - Avigilon 1.0-H3-DO1 Manual Del Usuario

5. In the Avigilon Camera Installation Tool, adjust the
camera's Image and Display settings to achieve the
desired zoom position.

Installing the Dome Cover

To install the dome cover, complete the following steps:
1. Rotate the black shield located inside the dome bubble so
that it does not block the camera's field of view.
2. Attach the dome cover to the base by tightening the 3
tamper-proof screws. Use the tamper resistant key
included in the dome camera package to tighten the
screws. Be careful not to scratch the dome bubble.

Focusing the Dome Camera

NOTE: Ensure this procedure is performed after the dome cover is
installed, so the focus shift caused by the dome bubble's
refraction can be accomodated.
• In the Avigilon Camera Installation Tool, use the camera's
Image and Display settings to focus the camera lens.
a.
b.
Caution — Do not attempt to adjust the focus and zoom on
the camera manually or the camera lens may become
damaged.
Click the Auto Focus button to focus the lens.
If the desired focus was not achieved, use the focus
near and far buttons to adjust the focus.
9