Warranty Information - General DMM20 Manual De Usuario

result of the operator's error. To replace the fuse, open the
case and replace the blown fuse with the ratings
specified:
F1: 250mA/250V Fast fuse, 5mm Dia. X 20mm
F2: 10A/250V Fast fuse, 5mm Dia. X 20mm
WARNING
Before attempting to open the case, always be
sure that test leads have been disconnected from the
circuit under test. Close case and tighten screws
completely before using the meter to avoid electrical
shock hazard.

WARRANTY INFORMATION

In the U.S, General warrants its instruments and
accessories against defects in material or workmanship
for one year from the date of purchase. General will
replace or repair the defective unit, at its option, subject to
verification of the defect.
This warranty does not apply to defects resulting from
abuse, neglect, accident, unauthorized repair, alteration, or
unreasonable use of the product.
Any implied warranties arising from the sale of a General
product, including but not limited to implied warranties of
merchantability and fitness for a particular purpose, are
limited to the above. General shall not be liable for loss of
use of the product or other incidental or consequential
damages, expenses, or economic loss, or for any claim of
such damage, expenses, or economic loss.
State laws vary. The above limitations or exclusions may
not apply to you.
We encourage you to register your product online. General
will extend your warranty an additional 60 days if you
register at www.generaltools.com/ProductRegistry.
7