Rear Panel Overview - ION DESK ROCKER Manual De Inicio Rápido Del Usuario

REAR PANEL OVERVIEW

3
2
1
1. POWER – Use the included power cable to connect the speakers to a live power
source. Make sure your AC Voltage Selector (see item #2 below) is set to the correct
voltage for your country.
2. AC VOLTAGE SELECTOR – This 2-position switch sets the AC input voltage for the
speaker. U.S. users should set this switch to "100-120V" whereas U.K. and most
European users will need to set this to "220-240V".
3. OUTPUT TO LEFT SPEAKER – This is the audio connection to the left speaker. Use
the included 1/8" cable to connect the right speaker to the left speaker.
4. USB (1.1) – Use the supplied USB cable to
connect the speaker system to your computer.
Note that the DESK ROCKER USB speakers
are Plug-and-Play so there is no additional
driver installation necessary; the speakers
should be ready to use as soon as they are
plugged in.
5. 1/8" STEREO INPUT – Use a 1/8" stereo cable
(not included) to connect external sound
sources to this input.
6. RCA INPUTS – Use a stereo RCA cable (not
included) to connect external sound sources to
these inputs.
7. BASS BOOST – This 2-position switch allows you to boost the speakers' bass
frequencies.
4
5
7
6
3
3
If you experience problems when
connecting the speakers through a
USB hub, we
connecting the speakers directly to
your computer.
All input options are mixed together
as a stereo pair when recording
your external sources into your
computer.
recommend