Remote Control Unit; Troubleshooting - Sharp 8M-B120C Guía De Configuración

Part Names

Remote Control Unit

1
2
1 Signal transmitter
2 Operation buttons

Troubleshooting

Check the following before requesting repairs.
Problem
• Power is not turned on. • Check if the AC cord is connected properly and plugged securely into the
outlet.
• When the lamp is not lit, turn on the power using the power button on the
main body.
• An indication Temperature • The temperature of the Monitor has risen. Get rid of the causes of the
or Temperature of Monitor increased temperature (such as direct sunlight or hot air).
blinks, and power is turned off • Check if the Monitor is installed in a condition or location where the
automatically. temperature rise occurs easily. Do not cover the ventilation opening on the
back of the main body when installing.
• Frequently remove dust from internal equipment or ventilation opening if it
can be removed from the outside. For removing dust inside the equipment,
consult your dealer.
EN 10
Possible Solution