Wireless (802.1 1) Setup Problems - HP OFFICEJET PRO 8500A Guía De Instalación Inicial

Wireless (802.1 1) setup problems

This section provides information about
solving problems you might encounter when
connecting the printer to your wireless
network.
Follow these suggestions in the order listed.
Note: If you are still encountering
problems, see the problem-solving
information in the user guide (which is
available on your computer after you
install the software).
Step 1: Make sure the wireless (802.1 1) light is turned on
If the blue light near the printer's control
panel is not lit, wireless capabilities might
not have been turned on.
To turn on wireless, complete the following
steps:
•
HP Officejet Pro 8500A (A910a-f):
From the Home screen, touch right
arrow , touch Setup, touch Network,
touch Wireless, touch Wireless Radio,
and then touch On.
•
HP OfficeJet Pro 8500A (A910g-z):
From the Home screen, touch right
arrow , touch Network, touch
Wireless, touch Wireless Radio, and
then touch On.
After resolving the problems...
After you resolve any problems
and have connected the printer to
your wireless network, complete the
following steps for your operating
system:
Windows
Place the HP software CD into the
computer and run the software
installation program again.
Mac OS
Open the HP Utility, located in the
Dock. (HP Utility is also located
in the Hewlett-Packard folder in
the Applications folder on your
computer.) Click the Application
icon on the toolbar, double-click HP
Setup Assistant, and then follow the
onscreen instructions.
Tip: The model number is printed on a
label located inside the printer, near
the ink cartridges area.
Solve setup problems 29