Dmx Linking - Chauvet DJ INTIMIDATOR SCAN 305 IRC Guía De Referencia Rápida

Intimidator Scan/Barrel 305 IRC QRG

DMX Linking

Starting
Address
Master/Slave
Connection
IRC-6
(Infrared
Remote Control)
The Intimidator Scan/Barrel 305 IRC can work with a DMX controller when
linked by DMX serial connections. Instructions for connecting and
configuring this product for DMX operation are in the User Manual. If you
are not familiar with DMX, download the DMX Primer from Chauvet.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 502.
The Intimidator Scan/Barrel 305 IRC uses the DMX data connection for its
Master/Slave mode. Instructions for connecting and configuring this product
for Master/Slave operation are in the User Manual.
The Intimidator Scan/Barrel 305 IRC is compatible with the IRC-6 from
CHAUVET® DJ.
The following IRC-6 buttons are used with the Intimidator Scan/Barrel 305
IRC:
· <BLACKOUT> - Turns LED on/off
· <AUTO> - Selects auto program mode (scrolling)
· <SOUND> - Selects Sound-Active mode
· <STROBE> - Strobing (0–20 Hz)
· <SPEED> - Pan/Tilt auto program speed (decreasing)
· <SENSITIVITY> - Selects sound sensitivity
· <%> - LED dimmer
· <MANUAL> - Gobo selection
· <FADE> - Color selection
· <R> - Color cycling rainbow
· <G> - Gobo cycle effect
· <B> - Color rainbow and gobo cycle effect
· <A> - Pan/Tilt manual adjustment
· <W> - Prism effect
· <+> - Increase
· <-> - Decrease
· <0> to <9> - Selects auto program by number
· <UV> - No function
6
EN