Switch Settings; Mode Switch - Primos Hunting AUTOPILOT 65054M Manual De Instrucciones

Press OK to move to ID screen
Use "up" or "down" arrows to select numbers (1-9) for the 4 ID digits
Press ok after each digit is selected. After the 4 digits are selected press Ok to move to the SD card
format screen.
SD FORMAT SCREEN
Press "up" or "down" arrow to select Yes/No on the format. After selecting "Yes" hit the ok button to
confirm format. Once complete you will see a message "Format Success".
Press Ok to move onto the Firmware Version.
FIRMWARE VERSION (Updating Firmware)
Note: camera has to be with 50% battery capacity or more.
When the display shows , you are able to choose to update the firmware.
Firmware updating steps:
1) Please cope the firmware files "SPHOST.BRN" to the root directory of an SD card, and insert the SD
card to the camera;
2) Move the setting options to and select YES, the display will show "upgrading..."
3) After firmware upgrading finished, the camera will turn off. When you turn on the camera again,
the firmware upgrade will take into effect.
SWITCH SETTINGS (Group of 4 Small Slide Switches)

MODE SWITCH

The MODE switch selects the camera's image capture mode: photos, video, or time lapse mode.
PHOTO
Captures high (HI) or standard (LOW) resolution photos with motion detection. Your camera's photo
capture resolution can be found in the Technical Specifications chart in the back of this manual. Photo
is the most popular capture mode. File Format Saved to SD Card: JPEG Photos
VIDEO
Captures high (HI) or standard (LOW) resolution video clips with audio when motion is detected. Your
9