POLTI VAPORETTO ECO CARE Manual De Instrucciones página 16

CARE OF YOUR VAPORETTO
• Before attempting any maintenance operation,
make sure to always disconnect the appliance
from the electrical outlet.
• To clean the body of the appliance, use a moist
cloth.
Regularly check the status of the green gasket
located on the central connector (4). If
necessary, replace the gasket with the spare
washers supplied (15).
Fig. B
- Remove the broken / damaged green gasket.
- Insert the new one. Put it on the steam nozzle
and push it till its seat. See (fig. B)
- Lubricate the gasket with some oil.
PROBLEM
The appliance can not switch
on
Generator on/off switch (B) and
accessory switch (C) are on
but no steam is delivered.
VAPORETTO ECO CARE
TROUBLESHOOTING
Check that the lead is correctly plugged into a suitable electrical outlet.
Ensure that the appliance has been turned on using the ON/OFF switch
(B).
Wait for the switch (B) to turn off. If even once the lamp (B) is off, steam
is still not delivered, there is no water in the boiler. Fill according to the
instructions given in the manual.
14
Perform the same check on the connection black
gasket of the extension tubes (7) and the steam
gun (2).
Fig. C
- Remove the broken / damaged black gasket.
- Insert the new one. Put it on the steam nozzle
and push it till its seat. See (fig. C)
- Lubricate the gasket with some oil.
SOLUTION