Do not use the AC adapter or power cord if it is damaged.
Use of a damaged power cord or AC adapter may result in electrical shock or fire.
Replace damaged power cords and AC adapters.
Only use the AC adapter included in the Silhouette Curio™ box.
Use of other AC adapters may cause malfunctions or result in electrical shock or fire.
Be sure to connect the AC adapter to the Curio before plugging it into the wall.
The Silhouette blade is sharp.
Handle the blade housing with care and do not touch the blade itself.
Do not use or store the Silhouette Curio™ in a location exposed to direct sunlight or a direct
draft of an air conditioner or heater.
Excessive heat, dust and/or humidity can cause the machine to malfunction.
Do not use the Silhouette Curio™ in a location subject to excessive vibration or electrical
noise.
Do not pull on the power cable to unplug the Silhouette.
If a foreign object/substance enters the Silhouette during operation, cancel the current project
by turning the machine off.
Do not attempt to remove the foreign object or continue cutting.
Do not attempt to lubricate the Silhouette Curio™.
The Silhouette does not require lubricant or any liquid agent to operate normally.
Do not use any liquid cleaning agents or any other liquids on the interior of the Silhouette
Curio™ or around the Silhouette control panel.
Liquids will ruin the functionality of the machine.
Be sure to leave enough space around the Silhouette Curio™ during operation so the machine,
media, and cutting mat do not touch surrounding objects.
Keep the Silhouette Curio™ at least 3 feet away from any light or heat sources.
Always use the correct blade setting for the material you are cutting.
Using too deep of a setting can cause the cutting mat to wear out and can adversely affect cutting
performance.
When manually moving the cutting carriage, use caution and move slowly so as not to damage the
Silhouette hardware.
For any questions or concerns contact Silhouette Customer Service at support@silhouetteamerica.com
22
22