Napa CARLYLE TW12RH2 Manual Instructivo página 4

REPLACING THE HEAD KIT (CONT.)
Step 2: Apply grease on the drive, where shown. (fig. 2)
Step 3: Place the pawl with heart spring on the drive.
fig. 3)
Step 4: Place the drive spring in the screw hole on the
driver. (See Fig. 4). Then place the assembled drive in the
ratchet head as shown in fig. 5.
TW12RH2
Fig. 2
Fig. 3
Fig. 4
Fig. 5
4 Rev. 02/27/15