Napa CARLYLE TW12RH2 Manual Instructivo página 5

REPLACING THE HEAD KIT (CONT.)
Step 5: Place the direction plate onto the ratchet head
making sure the pin on the bottom of the direction plate
hooks into the cusp at the bottom of the heart spring.
See arrows in fig. 6.
Step 6: Fasten the direction plate to the ratchet head with
the direction plate screw. fig. 7.
Step 7: Tighten the direction plate screw all of the way
down.
Test functionality: A. Turn the driver B. Switch can shift in
both directions. fig. 8.
TW12RH2
Fig.7
Fig.8
5
Fig. 6
Rev. 02/27/15