Scanning For Fm Stations; Preset A Station; Recall A Station; Now Playing Information - Albrecht Audio DR 890 CD Manual De Instrucciones

6.1. Scanning for FM stations

To search for FM station, press OK (SCAN on the remote control). The frequency display starts to
run up/down as DR 890 CD scans the FM band. It stops when it is receiving a station. You may
▲/▼
press on the remote control to tune station manually. Each step moves 0.05MHz

6.2. Preset a Station

While listening to a FM station, long press
EN
the 20 presets to save the currently playing station with OK. You can also easily store a station on
a specific preset number by pressing and holding 1-10 key on the remote control.

6.3. Recall a Station

Short press
OK. A preset can also be recalled by short pressing its corresponding 1 to 10 key on the remote
control. When a preset station is playing, it shows

6.4. Now playing information

While the stream is playing, the screen shows its frequency, or if RDS information is available,
station name and any further RDS information such as programme name, track, title and contact
details. If no information is available, just the frequency is shown. Each time you press INFO, an-
other set of information is displayed, cycling through RDS text, further RDS text (station/programme
type), frequency and today's date.
Stereo and RDS broadcasts are indicated with an icon at the bottom of the screen.

6.5. Settings

6.5.1. Scan settings

By default FM scans stop at any available station. Change the scan settings to stop only at stations
with good signal strength, select YES after choosing "Strong station only?".

6.5.2. Audio settings

All stereo stations are played in stereo. For weak stations, this may result in a poor signal-to-noise
ratio. To play weak stations in mono, select FM>Audio settings: "Listen in mono only".

7. Bluetooth Mode

The DR 890 CD is able to connect to other Bluetooth sources and play their audio streams. Please
note that the maximum Bluetooth range is about 10 meters and the radio is not able to connect to
other Bluetooth headsets, but sources only, such as smartphones.
44
to go to the Recall from Preset menu select the desired station and confirm with
Scan setting
Audio setting
System settings
Main menu
until the Save to Preset menu opens. Select one of
(1, 2, 3, etc) at the bottom of the screen.
FM
English
>