Roof Reinforcement / Power Supply - Webasto Cool Top Trail 35 Instrucciones De Funcionamiento E Instalación

463
(483)
680
536
Fig. 02: Installation measures (top/bottom view)
998 mm
340
mm
Fig. 03: Installation measures (side view)
4.5

Roof reinforcement / power supply

2
Fig. 05: Roof reinforcement
≥ 20 mm
3
Fig. 06: Cut-out with wooden reinforcement
Cool Top Trail 35
998
400 (360)
135
(155)
400 (360)
557
25-85 mm
557 mm
1
≥ 20 mm
1
3 3 2
■ The figures show the required installation space
for the outdoor unit and the air distributor on the
1
inside for the two different cut-out versions.
2
■ Centre the air distributor with the cut-out.
1. Position of the outdoor unit
2. Position of the air distributor
3. Square cut-out
F
F = Direction of travel
3
Measures in mm.
Fig. 04: Installation measures (front view)
The cut-out shall be reinforced with a wooden frame
using wooden bars which are at least 20 mm wide. In-
sulation material may have to be removed beforehand.
This reinforcement frame is to ensure that the roof will
not crush from the installation bolts and that air con-
ditioned air does not enter the ceiling space.
1. Roof
2. Wooden bars
1. Cut-out
2. Insulation in roof
3. Wooden bars
680 mm
43 mm
536 mm
8