Everest Printer Switches; Mode Switch Positions; Ac Voltage Switch - Rimage Everest III Manual De Instrucciones

Rimage Everest III printer

Everest printer switches

There are two switches on the rear
of the Everest printer: the mode
switch and the AC voltage switch.
Mode switch
Important! You must power off the Everest printer before changing the mode switch.
The mode switch is a rotary switch used to set the operational mode of the Everest printer. The
printer must be powered off for the mode to be changed. After changing the mode, the printer
must be powered on again to recognize the change. The opening at the base of the cap on the
switch indicates the selected mode. The printer comes set in regular operation mode. Only
diagnostic mode requires changing the mode switch.

Mode switch positions

Switch
Mode
Position
2 Regular operation
3 Diagnostic
5 – 9 Reserved

AC voltage switch

The AC voltage switch is used to select the AC voltage of the power outlet.
Warning! Set the AC voltage switch to match the AC voltage of the AC power outlet.
6
Mode Switch
Mode switch
Voltage switch
110875_A