ABB M2233 Serie Manual De Instrucciones página 61

ABB-Welcome
Connect the bottom part of the device according to the illustration. See Chapter 4.4.2,
Connection.
Setting
Set the address of the preferred outdoor stations and the address of the indoor station
on the rotary switches.
Set the master/slave function and the terminal resistor on the switches at the rear of the
top part of the housing. See Chapter 4.4.1, Terminal Resistor.
Latch the device
Latch the upper part of the device onto its bottom part . Place the upper side of the
device on the lock-in lugs and then press the bottom side onto the bottom part of the
device until it is caught by the clamp.
— 60 —
|