Connecting The Fusion Partybus Device To A Wireless Access Point - Fusion Apollo MS-SRX400 Manual De Inicio Rápido

In the image above, one Apollo RA770
stereo connects to a wireless router
and to two Apollo SRX400 zone stereos
. The two FUSION PartyBus stereo
zone stereos can stream sources from the
FUSION PartyBus stereo.
A FUSION PartyBus zone stereo is not the
same thing as a speaker zone. It is an
independent stereo that can either play
media from connected sources or stream
from a FUSION PartyBus stereo on the
network. You can connect a FUSION
PartyBus zone stereo, such as an Apollo
SRX400 zone stereo, to a single speaker
zone . You can connect a FUSION
PartyBus stereo, such as an Apollo RA770
stereo, to multiple speaker zones
cover a larger area with that stereo.
FUSION PartyBus devices cannot control
the speaker volume of another stereo. You
6
can adjust the volume of speakers or
speaker zones connected directly to the
stereo only.
Connecting the FUSION PartyBus
Device to a Wireless Access Point
1
Select
> WI-FI CLIENT > SSID.
A list of wireless access points within
rage appears.
2
Select the FUSION PartyBus wireless
access point.
3
Select an option:
• To enter the password, select
PASSWORD, enter the password,
and select
• If you are connecting to the
wireless access point using WPS,
verify that WPS has been enabled
on the access point, and select
WPS.
NOTE: It can take up to two
minutes to successfully connect to
the access point after you select
WPS.
to
4
Select SAVE.
> SETTINGS > NETWORK
.
Quick Start Manual