Daily Use; Charging; Turning On And Off - signia Pure Charge&Go Nx Manual De Instrucciones

Daily use

Charging

Place your hearing instruments in the charger.
Follow the instructions in
X
the charger's user guide.
You can also find useful
tips for charging in the
charger's user guide.
Low power indication
You will hear an alert signal to indicate the power cell
is running low. The signal will be repeated every
15 minutes. Depending on the usage of your hearing
instruments, you have approximately 1.5 hours to charge
your hearing instruments before they stop working.
Replacement of the power cell
If the fully charged hearing instruments do not last over
a full day of use (16 hours regular use without audio
streaming) then we recommend to have the power cell
replaced by your Hearing Care Professional.
10
Turning on and off
You have the following options to turn your hearing
instruments on or off.
Via charger:
Turning on: Take the instruments out of the charger.
X
The startup melody is played in your hearing
instruments. The default volume and hearing program
are set.
Turning off: Place the hearing instruments in
X
the charger.
Note that the charger must be connected to the power
supply. For details refer to the charger's user guide.
Via push button:
Turning on: Press and hold the push button until the
X
startup melody starts to play. Release the push button
while the melody is playing.
The default volume and hearing program are set.
Turning off: Press and hold the push button for
X
several seconds. Depending on the settings of your
push button, signal tones may be played before the
hearing instrument turns off.
See also the tips for charging in the charger's user guide.
11