Single Measurements - HEINE EN200 BP Manual Del Usuario

2.2

SINGLE MEASUREMENTS

PERFORMING THE SINGLE MEASUREMENTS
•
Start your EN200 BP.
•
The start screen appears in the display
accompanied by an acoustic signal.
•
Select the "single measurement" mode.
•
Position the blood pressure measurement cuff
on the left arm.
•
A note on the screen asks you to double-check
the position and size of the blood pressure cuff.
•
Confirm this screen and perform the measurement
by pressing the "Start"-button
•
The EN200 BP automatically slowly inflates the cuff
to measure the blood pressure. The pressure display
changes constantly during inflation.
•
The device inflates the cuff until an adequate pressure
for the measurement is reached. The device then slowly
releases the air from the cuff and performs the
measurement. The blinking
the pulse.
•
You can terminate the measurement at any time by
pressing the
MED 113275
.
-symbol represents
-button.
2017-05-02
49/176