Airwell RWV05 Manual De Operación E Instalación página 23

Operation
Unit No. Setting
(1) Entering: Press key for 10 seconds (if it is the four-way cassette model, the time is 15
seconds) to enter unit No. setting/ inquiring.
(2) Setting is available when the communication address between indoor and outdoor unit is flashing if
the indoor unit's dip switch can set the address, then use to adjust within the range of 0-3F. If the
indoor dip switch cannot set the address, the communication address between indoor and outdoor unit
is static, which can only be inquired.
(3) Wired controller's address is displayed before the colon of clock on the top-left corner, ranging from
0 to 15 and displayed in decimal system.
(4) The communication address between indoor and outdoor unit is displayed on the top-left corner.
The default value is the current unit's address, selecting other indoor units by the .
(5) Central address is displayed on top-right corner which cannot be edited.
(6) Press key to confirm and exit the setting after changing the communication address of indoor
unit. If press other keys or no operation in 10 seconds, it will automatically exit and keep previous
setting. If press or key, exit and the current setting is invalid. If press "ON/OFF", turn on/off
the unit directly and the current setting is invalid.
20