Customer Settings - RainSoft TC Serie Manual De Usuario

Customer Settings

The Customer Settings mode allows access to a variety of program-
ming options:
Setting the time of day
From the home screen press the Menu Scroll button. The clock set
icon will begin to flash, use the up or down arrows to adjust the time
of day. Press the Menu Scroll button four times to exit
Setting the regeneration time
From the home screen press the Menu Scroll button two times. The
hour of regeneration icon will begin to flash, use the up or down
arrows to adjust the regeneration time. Press the Menu Scroll button
three times to exit
Setting the days between regeneration
From the home screen press the Menu Scroll button three times. The
days between regeneration icon will begin to flash, use the up or down
arrows to adjust the days between regeneration. Press the Menu Scroll
button two times to exit
Setting pounds of salt
From the home screen press the Menu Scroll button four times. The
pounds to regenerate icon will begin to flash, use the up or down
arrows to adjust the pounds of salt. Press the Menu Scroll button one
time to exit.
NOTE: If the iron content of the water to be softened is zero, and the
hardness level is less than 20 gpg, we suggest you choose the low salt
setting for the most efficient operation.
Manual regeneration
To manually regenerate the system press the Regenerate Now button.
The control will count down from 10 seconds. To cancel the regener-
ation press the Menu Scroll button before the countdown is complete.
Once the regeneration has started you may manually advance to each
cycle by pressing and holding the Menu Scroll button for 5 seconds.
Important Note: When you exit the
Customer Settings, the computer
will automatically save any
changes that have occurred.
Important Note: The data chart
for each model is on page 4 to
page 6.
13