How To Operate The Machine - Clarke FUSION 20 Libro De Instrucciones

ENGLISH
EN

HOW TO OPERATE THE MACHINE

How To Operate the Fusion 20 (non-traverse)
1. Turn the key switch "ON".
2. When either pad power switch ( 1 - figure 9) is
pushed in, the pad motor will start.
3. Push the machine forward and guide it with the
control handles.
4. To reverse the direction, stop the machine by pulling
back on the control handles and then pulling the
machine backwards.
5. When you stop the machine, be sure to turn the key
switch off.
How To Operate the Fusion 20T (traverse)
1. Turn the key switch "ON".
2. Turn the pad power switch on (1 - figure 10).
3. When either the right or left pad/traverse switch (2 -
figure 10) is pushed in, the pad motor will start and
the traverse motor will propel the machine forward.
4. Control the speed of traverse by using the speed
control knob (3 - figure 10).
5. To stop, release the pad/traverse switch.
6. To reverse the machine, push in the traverse reverse
switch (4 - figure 10) and either the right or left pad/
traverse switch (2 - figure 10) at the same time.
7. To stop, release the pad/traverse switch.
8. When you stop the machine, be sure to turn off the
key switch.
Page -10-
1
Figure 9
4
2
Figure 10
Clarke ®
Operator's Manual (EN) - FUSION 20 / 20T
1
3
2
1