Front Panel - Alto Uber LT Guia Del Usuario

Features

Front Panel

11
2
1.
Combo Inputs with Volume Control: Use a standard 1/4" (6.35 mm) TRS or XLR cable (not included)
to connect your sound source to each input. Use the Volume knob to adjust the level of each one.
2.
Line/Mic Switch: Use this switch to set the Input to accept either a Line-level or Mic-level sound
source.
Note: When using an instrument with passive pickups, set the switch to the Mic setting. When using an
instrument with active pickups, set the switch to the Line setting.
3.
Bluetooth: The Bluetooth LED will be lit when a device is paired to Uber LT. This LED will not be lit
when Uber LT is first powered on (unless it was previously paired with a device). Press the Bluetooth
button to disconnect a paired Bluetooth device.
4.
Auxiliary Input with Volume Control: This stereo 1/8" (3.5 mm) input can be used to connect a CD
player, MP3 player, or other audio source. The Volume control adjusts auxiliary input and Bluetooth
volume.
5.
Master Volume Control: This adjusts the loudspeaker's main mix volume, which includes
Instrument/Microphone Inputs, Auxiliary Input, and the audio of a paired Bluetooth device.
6.
Line Out: This 1/4" (6.35 mm) TRS output can be connected to a stereo auxiliary input or to a mixer
using a TRS-to-dual-TS splitter cable (not included). The Line Out is post-Master Volume Control.
7.
USB Charging Port: Connect your device's charge cable here to charge it. USB charging only
functions when the unit's power is turned on.
Note: To charge smartphones and tablets faster, put the device's screen to sleep.
8.
Power Switch: Use this switch to power the loudspeaker on or off. Make sure all Volume knobs are set
to "zero" before powering it on. When the loudspeaker is powered on, the Power LED above it will be
lit.
6
2
1
3 4
1
8
7
5
6
9
10