Alto Uber LT Guia Del Usuario página 7

9.
Charge Indicator: This LED will illuminate when Uber LT is connected to AC power to indicate it is
charging. Once charging is complete, the LED will go off.
10.
Battery Level Indicator: While the unit is powered on, these four lights indicate the power left in the
battery. Battery life varies based on volume and usage.
11.
NFC (Near-Field Communication): Touch and briefly hold your supported and enabled device to the
NFC logo to pair the device. See
Rear Panel
1.
Power Cable Input: Insert the included power cable here to charge the unit.
Please note that when the power cable is connected, the battery will still
charge while the unit is in use.
Operation
Pairing a Bluetooth Device
1. Turn on your Bluetooth device.
2. Turn on Uber LT using the power switch. If you have previously connected to another Bluetooth
device, Uber LT will reconnect.
3. Navigate to your Bluetooth device's setup screen, find Uber LT and connect.
Note: If your device requires a passcode or PIN, enter 0000.
4. The Bluetooth LED will light up solid when it is "paired."
If your Bluetooth device is not able to connect to Uber LT, press the Bluetooth button on Uber LT to
break previous Bluetooth connections and reset the Bluetooth module.
5. Start playback from your Bluetooth device.
6. To disconnect a connected Bluetooth device and connect to another Bluetooth device, press the
Bluetooth button. Repeat Step 3.
Note: If you experience trouble connecting or playing music, update your device's OS.
Pairing a Bluetooth Device Using NFC
NFC (near-field communication) allows data exchange from devices, such as pairing, by gently bumping
them together. Check in your device's manual to see if this feature is supported.
To use NFC to pair with Uber LT:
1. In order to use NFC, your device must be turned on and unlocked.
2. Enter your device's Settings menu and check that NFC is turned On (one-time step).
3. Power on Uber LT.
4. Touch and briefly hold your device to the NFC logo located on Uber LT's top panel.
5. Follow the pairing instructions that appear on your phone. If a passcode is required, enter "0000".
6. To unpair, gently bump your device against the NFC logo.
Using the Aux Input
Connect your smartphone, MP3 player, or similar device to the Aux Input. Adjust the output volume on your
source device and then adjust the overall volume using the Aux Input Volume Control on Uber LT.
Pairing a Bluetooth Device Using NFC for more information.
1
7