Serta Motion Custom II Manual De Instrucciones página 19

headboard bracket installation guide
A 9/16" & 1/2" socket and crescent wrench are necessary to complete installation.
STEP 2
Attach the plastic spacer and T-Bracket .
a .) Measure the distance between the mounting holes on the
headboard and install the spacer and attachment plate to
accommodate the headboard .
b .) To install the plastic spacer and attachment plate, you will need
(2) long bolts and (2) nuts . Place the spacer and attachment
plate in the desired location and slip the bolts through the holes
with the head of the bolt facing outward . Position the bolts
diagonally on the spacer . Use the 9/16" socket and wrench to
tighten the bolts .
STEP 3
You may now connect your headboard to the attachment plates
using the remaining short bolts and nuts to secure it to the
brackets . The heads of the bolts will face outward . Use a 9/16"
socket and 1/2" wrench to tighten the bolts .
17